2015-2018 Mazda 3 Door Check Strap Keeps Door From Opening Too Far

The door check strap is one component that can wear out or become damaged over time. That's where the 2015-2018 Mazda 3 Door Check Strap Keeps Door From Opening Too Far Genuine New comes in.

Here are the steps to replace the door check strap on a 2015-2018 Mazda 3:

Tools Needed:

• Phillips head screwdriver
• Flat head screwdriver
• Trim panel removal tool (optional)
• 10mm socket wrench

Steps:

1. Open the door to be worked on and locate the door check strap assembly, which is located in the door jamb area.
2. Use a Phillips head screwdriver to remove the two screws that secure the door check strap assembly to the door frame.
3. Use a flat head screwdriver or a trim panel removal tool to carefully pry the plastic cover off of the door check strap assembly.
4. Locate the bolt that secures the door check strap assembly to the door and use a 10mm socket wrench to remove it.
5. Carefully remove the old door check strap assembly from the door and discard it.
6. Take the new door check strap assembly and carefully insert it into the door in the same location where the old assembly was removed.
7. Install the bolt that secures the door check strap assembly to the door and tighten it with a 10mm socket wrench.
8. Align the plastic cover with the door check strap assembly and snap it into place.
9. Use a Phillips head screwdriver to reinstall the two screws that secure the door check strap assembly to the door frame.
10. Test the new door check strap assembly by opening and closing the door to ensure it functions properly.
11. Repeat the process on any other doors that require a new door check strap assembly.
12. Dispose of any old parts and materials in an environmentally responsible manner.

That's it! The installation process is now complete.