2011-2015 Tahoe Yukon Suburban Driver Side HVAC Temperature Valve 89019306

Are you tired of dealing with uneven temperatures in your vehicle? It's time to replace your faulty Driver Side HVAC Temperature Valve with the Genuine New 89019306 part for your 2011-2015 Tahoe, Yukon, or Suburban. This high-quality valve is designed to control the temperature of the air flowing through the driver's side vents, ensuring that you're always comfortable no matter what the weather is like outside.

Installation Instructions:

1. Locate the driver side HVAC temperature valve in your Tahoe, Yukon or Suburban. It is typically located near the firewall, in the engine compartment, and can be identified by the coolant hoses connected to it.
2. Disconnect the negative battery cable from the battery terminal.
3. Using a suitable tool, disconnect the coolant hoses from the valve.
4. Remove the electrical connector from the valve by pressing the release tab and pulling it off.
5. Remove the mounting bolts securing the valve to the vehicle using a socket wrench.
6. Remove the old valve from the vehicle.
7. Install the new valve in the reverse order of the above steps, making sure that the electrical connector and coolant hoses are properly connected.
8. Reconnect the negative battery cable to the battery terminal.

Tools needed:

• Socket wrench
• Suitable tool for disconnecting coolant hoses

Skill level: Moderate

Time needed: Approximately 1-2 hours, depending on the skill level of the person performing the installation.