2000-2004 Toyota Tundra or Sequoia Drivers Side Front Seat Belt Buckle Tan- For Power Seats Only

The Genuine 2000-2004 Toyota Tundra or Sequoia Drivers Side Front Seat Belt Buckle is a genuine OEM (original equipment manufacturer) auto part that is specifically designed to fit and function seamlessly with the 2000-2004 Toyota Tundra and Sequoia models with power seats only. As an OEM product, you can trust that this seat belt buckle will perfectly match the original equipment on your vehicle for an exact fit and finish.

It's important to note that this seat belt buckle is only compatible with power seats and will not work with manual seats. Be sure to check your vehicle compatibility before purchasing.

It's important to note that the color of this seat belt buckle is tan, which is the only color available. All other colors have been discontinued by Toyota.

Installation Instructions:

1. Before starting, ensure that the vehicle is turned off and the key is removed from the ignition.
2. Locate the existing seat belt buckle that needs to be replaced on the driver's side.
3. Remove any covers or trim pieces that may be covering the seat belt buckle, if necessary.
4. Use a socket wrench or pliers to remove the bolts or screws that are holding the old seat belt buckle in place.
5. Gently disconnect any wiring or connectors that may be attached to the old seat belt buckle.
6. Remove the old seat belt buckle from the vehicle.
7. Take the new seat belt buckle and connect any wiring or connectors to it that may be necessary.
8. Place the new seat belt buckle in the same location as the old one and secure it with the bolts or screws.
9. Replace any covers or trim pieces that were removed in step 3.
10. Test the new seat belt buckle to ensure that it is functioning properly and securely installed.

Skill level: Moderate Time required: Approximately 30 minutes Tools needed: Socket wrench or pliers